Using a Swagelok® Hand Tube Bender
Swagelok® hand tube benders provide consistent, high‑quality bends in tubing made from most materials used with Swagelok tube fittings. Watch this video to learn how to use one. (6:11) Uploaded 04.22.2013
Swagelok® Tube Fittings Extreme Testing Video
Committed to quality, Swagelok® products have solved critical challenges in extreme conditions all over the globe. Watch high-quality in action as Swagelok® tube fittings withstand several extreme tests. (8:53) Uploaded 03.22.2013
Flattening Regulator Flow Curves to Minimize Droop
Droop, the decrease in outlet pressure as downstream flow increases, is an issue for all regulators. Sometimes it is critical to keep the pressure constant as flow changes. Watch this video to learn about considerations in design for minimizing droop in a pressure-reducing regulator. (5:25) Uploaded 01.04.2013
Selecting the Correct Hose End Connection
The right hose, with the right end connection, keeps a process performing safely and cost effectively. Watch this video for tips on selecting the correct hose end connection for your process. (5:18) Uploaded 01.04.2013
Swagelok Tube Fitting Assembly - One Inch and Under
The Swagelok Tube Fitting is designed to provide a leak-tight seal for pressures up to the suggested allowable pressure rating of the tubing. The two-ferrule, mechanical-grip, hinging-colleting type connection consists of a fitting body, a nut, a front ferrule, and a back ferrule. This clip shows the three-step process for assembling tube fittings that are one inch and smaller. (5:04) Uploaded 02.27.2012
Installing a Swagelok VCR® Metal Gasket Face Seal Fitting
Swagelok® VCR metal gasket face seal fittings offer the high purity of a metal-to-metal seal, providing leak-tight service from vacuum to positive pressure. This video demonstrates how to install a VCR fitting. (4:48) Uploaded 01.04.2013
Swagelok Tube Adapter Assembly
The Swagelok Tube Adapter complements the Swagelok tube fitting and allows fitting-to-fitting connections. Swagelok tube adapters can help eliminate difficult alignment problems and reduce inventories. The video shows how to assemble tube adapters that are one inch and smaller. (3:53) Uploaded 02.27.2012
Swagelok Tube Fitting Cap Assembly
Swagelok caps are used to block off the end of a tube run, and are installed using the same procedure as a tube fitting. Watch the video for a demonstration. (3:31) Uploaded 02.28.2012
Swagelok Tube Fitting Plug Assembly
Swagelok tube fitting plugs are used to block a tube fitting port when needed. Watch the video to see this simple installation process. (1:48) Uploaded 02.29.2012
Swagelok Tube Fitting Port Connector Assembly
A port connector consists of a machined ferrule connection on one end and a tube adapter connection on the opposite end. It is designed to allow fitting-to-fitting connections. The video shows how to assemble port connectors that are under one inch. (4:42) Uploaded 03.02.2012
Identifying Thread Pitch & Size
Learn to identify thread pitch and size using calipers, a pitch gauge, and thread identification guide. This video also explains tapered and parallel threads. (3:24) Uploaded 02.22.2012
SWAK Application
Swagelok SWAK is an anaerobic thread sealant that provides reliable sealing on metal pipe threads. This video demonstrates how to apply SWAK to a fitting. (2:56) Uploaded 03.05.2012
PTFE Tape Application
PTFE Tape is thread sealant used on male tapered pipe threads to aid in sealing. This clip shows how to apply the tape. (3:01) Uploaded 03.05.2012